CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
- Marca: AMP Commscope
- Código: 884040108-10
-
PDF Title
CABO FTP CAT6A LSZH BLINDADO AZUL AMP (CAIXA COM 305M) - INSTRUFIBER
DESCRIÇÃO
Product Classification
Regional Availability Latin America
Portfolio NETCONNECT®
Product Type Twisted pair cable
GENERAL SPECIFICATIONS
Product Number CS44Z1
ANSI/TIA Category 6A
Cable Component Type Horizontal
Cable Type F/UTP (shielded)
Conductor Type, singles Solid
Conductors, quantity 8
Drain Wire Type Solid
Jacket Color Blue
Pairs, quantity 4
Separator Type Isolator
Transmission Standards ABNT/NBR 14703 | ANSI/TIA-568.2-D | Anatel | ISO/IEC 11801 Class EA
DIMENSIONS
Cable Length 304.8 m | 1000 ft
Diameter Over Conductor 1.140 mm | 0.0449 in
Diameter Over Jacket, nominal 7.188 mm | 0.283 in
Conductor Gauge, singles 23 AWG
Drain Wire Gauge 26 AWG
ELECTRICAL SPECIFICATIONS
Characteristic Impedance 100 ohm
Characteristic Impedance Tolerance ±15 ohm
dc Resistance, maximum 6.66 ohms/100 m | 2.03 ohms/100 ft
Delay Skew, maximum 45 ns
Dielectric Strength, minimum 1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency 5.6 nF/100 m @ 500 MHz
Nominal Velocity of Propagation (NVP) 64 %
Operating Voltage, maximum 80 V
Remote Powering Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Segregation Class c
MATERIAL SPECIFICATIONS
Conductor Material Bare copper
Insulation Material Polyolefin
Jacket Material Low Smoke Zero Halogen (LSZH)
Shield (Tape) Material Aluminum/Polyester
MECHANICAL SPECIFICATIONS
Pulling Tension, maximum 11.34 kg | 25 lb
ENVIRONMENTAL SPECIFICATIONS
Installation temperature 0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature -20 °C to +60 °C (-4 °F to +140 °F)
Acid Gas Test Method IEC 60754-2
EN50575 CPR Cable EuroClass Fire Performance No Rating
Environmental Space Low Smoke Zero Halogen (LSZH)
Flame Test Method ABNT/NBR 14705 | IEC 60332-1
Smoke Test Method IEC 61034-2
PACKAGING AND WEIGHTS
Packaging Type Reel
REGULATORY COMPLIANCE/CERTIFICATIONS
Agency Classification
ROHS Compliant